6
ASSEMBLY
5
6
7
8
9
1. Remove the appliance head from the tank by
unlocking the 2 x side locking handles pulling
them outwards, then upwards.
Place the appliance head upside down onto
a flat surface, or on its side (if the carry
handle is already assembled).
2. Remove the HEPA filter (installed upon
purchase) by pulling it away from the
appliance head.
Slip the foam filter over the filter basket.
Ensure the foam filter covers the full filter basket.
Re-assemble the appliance head back onto the
tank, and secure the 2 x side locking handles.
Connect the flexible hose to the Flexible Hose
Outlet – Suction by inserting into the outlet and
aligning the arrow and locking pin on the end
of the flexible hose, with the arrow and ridge on
the top of the Flexible Hose Outlet – Suction.
This should ensure the locking pin on the
flexible hose aligns with the ridge in the Flexible
Hose Outlet – Suction. Rotate the flexible hose
to the left to secure the hose into position.
Connect the flexible hose to the Flexible
Hose Outlet – Blower by inserting into the
outlet and aligning the arrow and locking pin
on the end of the flexible hose, with the ridge
on the top of the Flexible Hose Outlet – Blower.
Rotate the flexible hose to the left to secure the
hose into position.
