WR25205
User Guide
v 2 – 26/08/2015
p. 3 / 11
Heavy-Duty Worksite Radio
User Guide
Please read the manual thoroughly before bringing this
device into service. If the device was damaged in transit,
do not install or use it and contact your dealer.
Safety Instructions
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children shall be supervised to ensure that
they do not play with the appliance.
Warning!
Do not leave the device unattended
when switched on.
This device is capable of producing sound
levels that could cause permanent hearing
loss. Do not operate for a long period of time
at high volumes or at a level that is
uncomfortable.
-
Familiarise yourself with the functions of the device
before actually using it.
-
All modifications of the device are forbidden for
safety reasons. Damage caused by user
modifications to the device is not covered by the
warranty.
-
Damage caused by disregard of certain guidelines in
this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing
defects or problems.
Description
1
volume button
2
FM antenna
3
tuning button
4
power indicator
5
speaker
6
AUX IN jack
7
DC inlet
8
battery compartment
9
FM/power button
10
carrying handle
Use
Installing the Batteries
-
Locate the battery compartment at the back of the
set.
-
Unscrew the battery compartment cover using an
appropriate screwdriver.
-
Insert four R14/C-size batteries into the battery
compartment in accordance with the polarity.
-
Close the battery cover and retighten the screws.
Powering the Unit with an AC Adaptor
-
Connect the included power adaptor to the DC inlet
of the set.
-
Plug the power adaptor into the mains.
Operating your Radio Set
-
Switch on your radio by rotating the FM/power
button to the FM position.
-
Rotate the tuning button and select the desired
station frequency.
-
Adjust the volume level using the volume button.
-
Rotate the FM/power button to the OFF position to
switch off the radio.
