@ToolkiRC 2021
34
4. ESC test
Select ESC test with the cursor, short press [OK] to
enter the ESC test mode, scroll [Scroll wheel], move the
cursor to pulse width/ cycle, press [OK] to change the
corresponding value. As shown below:
5. Power
Select the adjustable power supply with the cursor,
and short press [OK] to enter.
The voltage and current of the output power
supply can be set at will. Move the cursor to start, short
press [OK] to start power output and return to the main
interface. As shown below:
Summary of Contents for M9
Page 33: ... ToolkiRC 2021 33 ...
