@ToolkiRC 2022
44
Other functions
1. Firmware upgrade
After connecting the M7AC to the computer with the
USB cable in the box, the computer will recognize a USB
drive named Toolkit. Download the upgrade file app.upg
from the official Toolkit RC website and overwrite the
files in the drive to upgrade the firmware.
2. USB output
TypeA USB supports 5.0V 2.0A output to charge
mobile devices.
3. Automatically continue charging/ discharging
When a battery is fully charged, connect the next
battery. The device will automatically continue to charge
and discharge, you can start and stop this function in the
settings menu
4. Fan level
When the internal temperature of the device exceeds
45°C, the fan turns at half speed to reduce noise. When
the internal temperature exceeds 53°C, the fan turns on
full-speed to enhance heat dissipation.
6. Manual voltage calibration
With the M7AC powered off, press and hold the
[roller]. without releasing the roller, connect the power
supply, and the system will enter the manual voltage
calibration mode. Use a voltmeter to measure the actual
voltage of each battery, move the cursor to the
Summary of Contents for M7AC
Page 34: ... ToolkiRC 2022 34 ...
Page 36: ... ToolkiRC 2022 36 ...
