@ToolkiRC 2022
13
number of cells by checking the total voltage against the
balance port data. Short press [OK] and [Exit] to take
effect and return to the previous interface.
===================================
Tips:
1.
If
the
connected
battery
is
over-discharged or over-charged, this may cause
an incorrect cell-count, in which case the cell
number needs to be adjusted normally.
2. If the cell count is set incorrectly, it may lead to
overcharging, which can present itself as a fire risk.
3. The cell count can be more accurately
determined if the balance port is connected.
=================================
3. Work Mode
Move the cursor to [Mode] and press [OK] to
modify the work mode, as shown in the figure below:
Summary of Contents for M7AC
Page 34: ... ToolkiRC 2022 34 ...
Page 36: ... ToolkiRC 2022 36 ...
