ToolKitRC M7, Manual

Page: 21 / 45

@ToolkiRC 2021
21
PeakV: When the nickel-metal hydride battery is fully
charged, the voltage drop of each piece peaks.
===================================
9. Cycle setting
When the battery type is NiMh, and the work
mode is cycle, the battery setting interface will increase
Cycle times and Rest time setting. As shown below:
Move the cursor to [Cycle times] and press [OK] to
set the range of cycle times to 2-12.
The charger will follow the pattern cycle of
discharge->charge->discharge->charge....
"Discharge -> charge" is 2 times.