• If it is no longer possible to operate the product safely, stop using it and prevent unintended
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Consult a technician if you are not sure how to use or connect the product, or if you have
concerns about safety.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair
centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Electrical safety
• Never pour liquids over electrical devices or place objects filled with liquid next to the product.
If liquid or an object does enter the interior of the device, power down the respective socket
(e.g. switch off the circuit breaker), and then remove the mains plug from the mains socket.
Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated may destroy the product. The mains adapter may also
cause a fatal electric shock!
• Allow the product to reach room temperature before connecting it and putting it to use. This
may take several hours.
• Do not touch the mains adapter if there are any signs of damage, as this may cause a fatal
electric shock! Switch off the mains voltage to the socket containing the power adapter (switch
off at the corresponding circuit breaker or remove the safety fuse, and then switch off at
the corresponding RCD protective switch). You can then unplug the mains adapter from the
mains socket. Dispose of the faulty mains adapter in an environmentally friendly manner and
discontinue use. Replace it with a power adapter of the same design.
• The mains outlet must be located near to the device and be easily accessible.
• Only power the product using the mains adapter provided.
• Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the mains adapter from the mains socket by pulling on the cable; always use
the grips on the plug.
• When setting up the product, make sure that the cables are not pinched, kinked or damaged
by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
c) Persons and product
• Do not look directly into the light source when the lamp is in use.
• Never use the magnifying glass to look directly at bright sources of light. This may cause
eye damage.
• Never look at bright light sources (e.g. LED lamps or lasers) through the magnifying glass.
This may result in eye injuries.
• Always cover the glass lens with the lens cover when the lamp is not in use. Strong sunlight
that shines through the magnifying glass can result in the burning glass effect and may cause
a fire.
• Never leave the lamp unattended.
• Check the lamp for signs of damage from time to time.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with other optical instruments!
• Do not secure any objects (e.g. decorations) to the product.
• Never install the product in the vicinity of flammable materials (e.g. curtains or decorative
material). Ensure that there are no drafts which may cause other objects (e.g. curtains) to
come into contact with or into the vicinity of the lamp. This constitutes a fire hazard!
• Always comply with the accident prevention regulations for electrical equipment when using
the product in industrial facilities.
Operating instructions
LED magnifying lamp, 150 mm dimmable
Item no. 1662856
SMD LED magnifying lamp, 127 mm 8 W
Item no. 1662857
Intended use
This lamp is designed to illuminate work spaces and features a magnifying glass that provides a close-up
view of objects. It must to be securely attached to a suitable surface (e.g. table or window sill) using the
desk clamp. Item no. 1662856 features two different brightness levels. The product is powered by the power
adapter provided. Only connect the product to a standard household mains voltage of 230 V/AC.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in bathrooms)
must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazards such as a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe
place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
Package contents
• Magnifying lamp
• Power adapter
• Desk clamp
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR code on this
page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the product.
This symbol indicates that this product is built according to protection class II. It is equipped with
reinforced or dual insulation between the mains circuit and the output voltage.
The product must only be installed and used in dry, indoor locations. It must not become damp
or wet, as this may cause a fatal electric shock!
This device was constructed according to protection class III. Protection class III includes
electrical devices with a low voltage power supply (< 50 volts) using a safety transformer or
batteries/rechargeable batteries/solar energy etc. Devices in protection class III have no
connection for protective insulation - they must not be connected to the protective earth.
This symbol indicates that a safety transformer is built into the product according to the VDE
0551 guidelines.
Independent converter. The converter is designed to operate lights without additional covers or
safety measures.
Safety instructions
Read the operating instructions and safety information carefully. If you do not follow the
safety information and information on proper handling in these operating instructions,
we will assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous toy
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
