36
Important! After cutting the blade reaches high temperatures: waiting for it to cool down before
replacing it.
Important! The blade has very sharp edges: use gloves to prevent serious injuries.
Important! The assembly of the blade must be carried out with absolute precision. Incorrect assembly
causes very serious danger.
When replacing the blade, proceed as follows. The operation must be carried out by an expert; if in doubt please
contact an authorized service centre.
- Unplug the tool from the electric power supply.
- For correct reassembly, carefully observe the various components
before proceeding.
- Press the button (20) that locks the rotation of the motor/blade and
with the hex wrench (21) supplied unscrew the blade fixing screw (
13); turn the key in the blade rotation direction. If the lock button is not
present you must use 2 keys to perform the operation, one to lock the
rotation and the other to unscrew the screw.
-
Remove the outside flange (14) and extract the blade (the inside flange
must stay assembled on the motor shaft) to facilitate the operation turn
the mobile guard (9) through half a turn and keep it open.
- Clean components and the new blade.
- Assemble the new blade observing the rotation direction: the blade arrow must match the one impressed on the
machine.
-
Reassemble the outside flange, ensuring that the shaped hole of the flange itself is placed on the shaped shaft
of the motor.
- Tighten the screw well without hitting the key with a hammer or other tool.
- Carefully check that the blade guard goes back into rest position and that it works correctly.
- Make sure the blade turns freely without jerks.
- Carry out a test with the machine running idle.
21
20
a
b
Fig. E
