37
14. Technical data
Rechargeable battery .......................................1x Li-ion rechargeable battery / 20 V / 2 Ah or 4 Ah
Rechargeable battery operating time ...............approx. 12 minutes (2 Ah rechargeable battery)
approx. 25 minutes (4 Ah rechargeable battery)
Spool speed ......................................................max. 8500 rpm
Trimmer line ...................................................... Diameter:
Ø 1.6 mm
Material:
Nylon
Length:
3 m
Cutting area ......................................................Ø 30 cm
Vibration (according to EN 50636-2-91) ...........<2.5 m/s
2
, K=1.5 m/s
2
(on the main handle)
Sound pressure level ........................................L
PA
: 84.07 dB(A); K
PA
: 0.47 dB(A)
Guaranteed sound power level .........................L
WA
: 96.07 dB(A); K
WA
: 0.47 dB(A)
Operating/storage conditions ............................0 to +40 °C, <85% relative humidity
Dimensions (W x H x D) ...................................35 x 105 x 33 cm (telescopic rod retracted)
35 x 124 x 33 cm (telescopic rod extended)
Weight ..............................................................1.63 kg (without rechargeable battery)
Caution!
The noise level of the appliance may exceed 80 dB(A). Wear suitable ear protection to prevent hearing
damage.
The vibration level specified in this manual has been determined using a standardised measurement
method according to EN 50636-2-91 and can be used to compare electric tools. It can also be used to
obtain a preliminary estimate of your exposure to vibrations.
The specified value indicates the vibration level when the tool is used for its intended purpose. The actual
vibration level may differ from the specified value if the tool is used for other purposes, if other tools are
used, or if the tool has not been serviced properly. These factors can considerably increase your exposure.
For an accurate estimate of your exposure, account for the times when the appliance is switched off or not
in use. These factors can considerably reduce your exposure.
Take additional safety measures to protect the user against the effects of vibration, e.g.: Maintenance of
electric tool and insertion tools, keeping your hands warm, organisation of work processes.
