2
Operating Instructions
Tyre Changing Tool Kit
Item no: 2559121
1 Intended use
The product is a tyre changing tool kit.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Torque wrench (adjustable torque)
■
Ratchet wrench (extendable)
■
Tread depth gauge
■
17 mm impact socket
■
19 mm impact socket
■
75 mm extension bar
■
125 mm extension bar
■
Magnetic parts tray
■
Nylon parts bag
■
Tool case
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR
code shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Product
■
Always check the product for any damage before use. If you notice any damage, discon-
tinue use.
■
Do not use the wrench with adapters for other square sizes – it must only be used with a
wrench socket of the same size as the wrench's square drive.
■
Do not use a lever extension (to increase the leverage while working with the wrench),
as this will result in damage to the wrench.
■
Do not use any attachments with joints, as these may affect the torque wrench value.
■
Never use a wrench as a striking tool, as this may cause permanent damage.
■
Do not expose the product to humidity, dust, dirt, oil, or chemicals.
■
Do not drop the product, as this may cause permanent damage.
■
If you have reason to assume that the torque wrench is inaccurate/has deviated from the
calibration range (e. g. after being dropped), discontinue use.
6 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
■
Store the product in the included storage box.
7 Technical data
7.1 Ratchet wrench (extendable)
Length............................................. 460 - 600 mm
Drive ............................................... 12.5 mm (1/2“)
Material........................................... CR-V
Dimensions (Ø x H) ........................ 40 x 460 mm (closed)
Weight ............................................ 1 kg
7.2 Torque wrench (adjustable torque)
Torque range.................................. 40 - 210 Nm
Accuracy......................................... ±4 %
Length............................................. 560 mm
Drive ............................................... 12.5 mm (1/2")
Dimensions (Ø x H) ........................ 48 x 560 mm
Weight ............................................ 1.35 kg
7.3 Material
17 mm impact socket...................... CR-MO
19 mm impact socket...................... CR-MO
75 mm extension bar ...................... CR-V
125 mm extension bar .................... CR-V
7.4 Standard data
Total weight .................................... 5 kg
Dimensions (L x W x H).................. Box: 62.5 x 23 x 10 cm
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2559121_V1_0722_dh_mh_en
9007199855333643-2
I2/O1
en
