Operating elements
1
2
3
4
5
6
7
1 Bracket (foldout 180º)
2 Power button
High → low → warning light
(flashing red) → OFF
3 Cover (in open position)
4 USB-A output
5 Charging device indicator
(green)
6 Charging battery indicator:
Charging (flashing red)
Fully charged (solid red)
7 Micro USB charging input
Operation
Before connecting, make sure that the USB power source can deliver sufficient current,
otherwise you may damage the source. Do not use a USB port of a computer, keyboard or USB
hub without a power adapter as the current supplied by these ports is insufficient.
Looking into an LED light in darkness can cause temporarily blindness. This can be dangerous
in high risk environments.
To protect the IP64 rating, check that the cover (3) forms a good seal when closed.
Risk of overheating. Do not connect any devices to the USB-A output (4) while the device is
charging.
a) Work light
• Press the power button (2) repeatedly to cycle between light modes: High → low → warning light
(flashing red) → OFF.
• The worklight will turn off when the battery needs to be recharged. Recharge it by connecting one end of
the included charging cable to the Micro USB charging input (7), and the other end to a suitable power
supply.
b) Power bank
• Connect your mobile device to the USB-A output (4).
• Charging will begin automatically on connection, and the charging device indicator (5) will light red.
Care and cleaning
• Disconnect the product, turn the light off, and allow to cool down before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Battery .................................................. Li-ion 4400 mAh (2 x 2200 mAh, 16.28 Wh)
Battery recharge ................................... approx. 7 hrs
Input voltage / current ........................... 5 V/DC / max. 1 A (via micro USB)
Output voltage / current ........................ 5 V/DC / 1 A (via USB-A)
Colour temperature ............................... 6500 K (low and high mode)
Brightness ............................................. 900 lm (high mode), 150 lm (low mode)
Power ................................................... 10 W (high), 3 W (low)
Runtime (approx.) ................................. 2.5 hrs (high), 8 hrs (low), 24 hrs (flashing)
Material ................................................. ABS, aluminium
Ingress protection ................................. IP64
Bracket ................................................. 180º
Protection class .................................... III
Operating/Storage conditions ............... -20 to +45 ºC
Cable .................................................... Micro USB to USB-A (30 cm)
Dimensions ........................................... 160 x 118 x 48 mm (W x H x D)
Weight .................................................. 368 g
Operating Instructions
Rechargeable LED Worklight
Item No. 2238078
Intended use
The product is intended to be used as a work light. It has three light settings, and a USB-A output for charging
mobile devices.
It has an ingress protection rating of IP64 which means it is dust tight and can resist water splashing from
all directions.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in other hazards. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Unit
• Charging cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
This device was constructed according to protection class III. Protection class III includes
electrical devices with a low voltage power supply (< 50 volts) using a safety transformer or
batteries/rechargeable batteries/solar energy etc. Devices in protection class III have no
connection for protective insulation - they must not be connected to the protective earth.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the appliance.
• Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
• Make sure the specifications of any connected device conform to the product specifications
listed in the technical data section.
• Do not short-circuit the USB input (7).
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
c) LED light
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2238078_v3_0920_02_dh_m_en
