25
9.
Insert / Remove Battery (Not Included)
• Set the power switch (3) to
O
.
• To insert a battery pack (15), align the tab on the battery with the
slot on the base of the housing.
•
Hold the tool and battery pack firmly without touching the power
switch (3).
• Slide the battery all the way in until it locks into place with a “click”.
Make sure it is securely fixed in place before letting go.
• Do not use force when inserting the battery. If it does not slide in
easily, the battery is not being inserted correctly.
• Press the battery release button to remove the battery pack.
10.
Power (Low / High / Off)
When inflating items rated for 0.7 bar (approx. 10 psi) or less, inflate in short bursts and check after each
burst by feel or determine accurate pressure using a calibrated measuring device.
• Power on:
- Switch to the “
I
” position for low pressure.
- Switch to the “
II
” position for high pressure.
• Power off by switching to the “
O
” position.
The LED light (10) activates when the power is switched on. The LED will deactivate after 20 seconds after
the power is switched off.
