Operating Elements
5
1
2
3
4
6
7
8
9
10
11
12
1 Clamp screw
2 Base clamp
3 Clamp socket
4 Lamp attachment plug
5 Power cable (not shown)
6 Lower arm
7 Upper arm
8 Lamp head adjust lock
9 Lens locking ring
10 Magnifying lens
11 Light control panel
12 LED ring light
Installation
Do not use force to over tighten the clamp screw
(1)
as this may damage the base
clamp
(2)
and surface it is mounted to.
Ensure that the surface attached the desk clamp is mounted to has parallel edges.
The desk clamp must not be mounted to desks with chamfered or tapered edges.
Make sure the lamp is securely held in place before letting go.
The jaws on the base clamp
(2)
may leave marks or scratch sensitive surfaces.
a) Attach Clamp
• Loosen the clamp screw
(1)
.
• Slide the clamp onto the horizontal surface.
• Tighten the clamp screw
(1)
.
b) Connect Lamp to Base
• Insert the lamp attachment plug
(4)
into the clamp socket
(3)
.
• Gently check to make sure the connection is secure before letting go.
Operation
Over adjusting or using excessive force may cause damage.
Please hold the base clamp
(2)
while making adjustments to prevent the lamp from
falling over.
• Connect the power cable
(5)
to a mains power supply.
• Loosen the lamp head adjust lock
(8)
.
• Adjust the lamp head to the desired position.
• Tighten the lamp head adjust lock
(8)
.
a) Light Controls
Button
Function
Power on / off.
Increase brightness.
Decrease brightness.
b)
Remove / Replace Lens
Always disconnect the lamp from the power supply before attempting to remove or
replace the lens.
To prevent damage, always make sure the lens locking ring
(9)
is securely tightened
and the magnifying lens
(10)
is held in place.
• Turn the lens locking ring
(9)
counterclockwise to release the magnifying lens
(10)
.
• Carefully remove the magnifying lens
(10)
.
• Turn the lens locking ring
(9)
clockwise to fix the magnifying lens
(10)
in place.
Care and Cleaning
• Always disconnect the product from the power supply before cleaning it.
•
Remove loose particles using a dust blower.
• Use a lens cleaning cloth for cleaning the lens. Alternatively, use a dry, clean, soft and lint
free cloth or a dust brush. If necessary, you can moisten the cloth with a small amount of
lukewarm water.
• When cleaning the lens with a cleaning agent, do not apply the cleaner directly onto the
lens. Always apply the cleaning agent to the cloth first.
•
Avoid excessive cleaning and applying too much pressure to the housing and lens.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
could damage the housing or stop the product from functioning properly.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines. You thus fulfill your statutory obligations and
contribute to the protection of the environment.
Technical Data
Operating voltage
.........................
220-240 V/AC, max. 12 W
Protection class ............................ 2
Lens material ................................ Glass
Lens size ...................................... ø178 mm
Magnification
................................
1.75x
LED ............................................... 72 pcs SMD
LED colour temperature ............... 6000 - 7000 K (cool white)
Luminance ....................................
approx. 850 lm
LED life ......................................... 20000 h
Clamping range ............................ 4 - 65 mm
Operating/Storage conditions
....... -10 to +40 ºC, 0 – 85 %
relative humidity (non-condensing)
Dimensions (W x H x D)
...............
approx. 26 x 120 x 4.6 cm
Cable length .................................
approx. 1.7 m
Weight .......................................... 3 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
*2131500_v1_0919_02_dh_m_en
