Product overview
1
2
3
4
5
6
1 Nozzles
2 Swivel adjustment
3
Spacer with filter
4 Hose connection
5 End cap with cleaning needle
(not shown)
6 Swivel tube
Setup
• Fasten the hose connection (4) in the spacer (3) by screwing it on clockwise.
• Turn the spacer counter-clockwise until you notice some resistance.
• Connect the hose connection with a suitable water hose.
• Place the product as centred as possible on the surface you wish to water.
• Watering starts as soon as the water supply is connected.
The watering range depends on the pressure of the water supply.
Fine adjustment
Set the swivel adjustment (2) to adjust the swivel limits of the swivel tube (6).
Care and cleaning
a) General information
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
• Use a slightly damp, lint-free cloth to clean the product exterior.
• Disconnect the product from the water hose and store it in a dry indoor area at freezing
temperatures and during months when no irrigation is necessary. Dry the product prior to
storage.
b) Interior cleaning
• Turn the end cap (5) counter clockwise all the way and pull it out.
•
Check the filter of the spacer (3) and the nozzles (1) for filth. Remove any dirt if present.
Press any filth through the nozzle into the product interior with the cleaning needle of the
end cap (5).
•
Rinse the interior with clean water.
• Place the end cap on again and turn clockwise to fasten.
Disposal
Dispose the product in accordance with local regulations. You thus fulfil your statutory
obligations and contribute to the protection of the environment.
Technical data
Irrigated area ................................ max. 418 m
2
(22 x 19 m)
Swivel angle ................................. 20 - 120°
Water pressure ............................. max. 6.89 bar (100 psi)
Operating/storage conditions ........
0 to +60 °C, 10 – 100 % RH
Dimensions (W x H x D) ............... 470 x 73 x 168 mm
Weight .......................................... 549 g
Operating Instructions
Square sprinkler 418 m
2
Item no. 1561111
Intended use
The product is used for watering rectangular areas in parks and gardens. The fine adjustment
allows adjustment to the irrigated area.
For safety reasons, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. Read the instructions
carefully and store them in a safe place. Only make this product available to third parties
together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery contents
• Square sprinkler
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads
or scan the QR
code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the
product.
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, strong vibrations and combustible
gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1561111_V1_0118_02_IPL_m_en
