• Furthermore, observe the safety and operating instructions as well as the neces-
sary safety requirements of the devices, machines, systems or equipment into
which you run the telescope handle, a mirror, the LED light or the magnetic head.
There is, for example, an injury risk (from rotating or moving parts inside machines)
as well as a life hazard due to an electric shock (for example in a control cabinet
with high voltages).
• Do not use the product in rooms with adverse environmental conditions, where
combustible gases, vapours or dust are or may be present! There is a risk of explo-
sion!
• Do not use force when using the product.
• Caution, LED light:
Do not look directly into the LED light!
Do not look into the beam directly or with optical instruments!
• The magnetic head is equipped with a strong magnet. Therefore, maintain sufficient
distance to all devices and objects that can be damaged due to magnetism (e.g.
bank card with magnetic stripe, analogue wristwatches, data carriers, or similar).
Keep sufficient distance to a pacemaker.
• The product must not be exposed to extreme temperatures, strong vibrations or
heavy mechanical stress.
Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
• Do not leave packaging material carelessly lying around, since it could become a
dangerous plaything for children.
• If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.
Battery instructions
• Batteries should be kept out of the reach of children.
• Do not leave batteries lying around in the open; there is a risk of them being swallowed by
children or pets. If they are swallowed, consult a doctor immediately.
• Leaking or damaged batteries can lead to caustic burning of the skin. Therefore, use suitable
protective gloves.
• Liquids leaking from batteries are very chemically aggressive. Objects or surfaces coming
into contact with these liquids could be considerably damaged. Therefore, store batteries in a
suitable location.
• Make sure that the batteries are inserted into the LED light according to the correct polarity
(po and negative/-).
• If the product is not to be used for a while (e.g. storage), remove the batteries from the LED
light. Outdated batteries can leak and damage the product, causing loss of warranty!
• Batteries must not be short-circuited, opened or thrown into fire. There is a risk of explosion!
• Do not recharge conventional non-rechargeable batteries; risk of explosion!
• Always change all the batteries at once, only use the same type and brand of batteries with
the same amount of power (do not mix full batteries with half-empty or empty ones).
• For the correct disposal of batteries, please read the chapter “Disposal”.
G
O P E R AT I N G I N S T R U C T I O N S
Inspection Mirror Set, 5pieces
Item no. 1276161
Intended use
The set consists of a telescopic handle as well as an LED light that can be attached to it
(3 suitable batteries are included in the delivery), one magnetic head and two different mirrors
(1x round, 1x rectangular).
All parts are delivered in a practical storage/transport bag.
With the magnetic head, you can retrieve small parts from areas that are difficult to access. You
can use the LED light to illuminate areas that are inaccessible.
Please read these operating instructions carefully to ensure safe use and operation of the prod-
uct. Keep these operating instructions in a safe place for future reference. If you pass the prod-
uct on to a third party, please pass on these operating instructions as well.
Always observe the safety instructions and all other information included in these operating
instructions.
Any use other than that described above is not permitted and can lead to damage of this prod-
uct; this can also lead to danger for the user.
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Explanation of symbols
The lightning symbol inside a triangle is a warning to inform you of potential risks of
personal injury, such as electrical shock.
This symbol indicates specific risks associated with handling, operation or use.
The “Hand” symbol indicates special tips and operating information.
Package contents
• Telescope handle
• LED light
• Magnetic head
• Round mirror
• Rectangular mirror
• 3 button cells
• Storage/transport bag
Safety instructions
The warranty will be void in the event of damage caused by failure to observe
these operating instructions! We do not assume any liability for any resulting
damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void.
• Unauthorised conversion and/or modification of the product is not allowed for safety
and approval reasons (CE).
• The product is not a toy and should be kept out of the reach of children!
• The product must not become damp or wet.
• When searching inside a machine or system with rotating/moving parts, the ma-
chine/device must be switched off. Wait until all parts have come to a complete
standstill. Secure the machine against unauthorised/unintended switch-on with suit-
able means, e.g. with a warning sign.
When searching inside electric devices or in the vicinity of dangerous voltages,
the device must be de-energised. Check if the device is voltage free using an ap-
propriate measuring device. Secure the device against unauthorised/unintended
switch-on with suitable means, e.g. with a warning sign.
Version 03/15
