background image

3

  SAFETY

  SAFETY MARKINGS

Always follow safety precautions when installing and operating this jack. Keep all decals on the unit clean and 

visible. Before proceeding ensure that you fully understand and comprehend the full contents of this manual. 

Failure to operate this equipment as directed may cause injury or death. The distributor is not responsible for 

any damages or injury caused by improper use or neglect.

Always use Jack Stands!

DO NOT USE

 wood blocks or any other non-approved load sustaining devices. The manufacturer only 

warrants loads to be sustained by jack stands that meet current ASME standards.

DO NOT USE

 wood blocks or any other non-approved lifting devices for a means of lifting with the jack and or 

load being raised. Failure to head these warnings may cause injury or death.

1.   Study, understand, and follow all instructions before operating this device.

2.   Do not exceed rated capacity.

3.   Use only on hard, level surfaces, with less than 3 degrees of slope.

4.   Lifting device only. Immediately after lifting, support the vehicle with appropriate means.

5.   Do not move or dolly the vehicle while on the jack.

6.   Lift only on areas of the vehicle as specified by the vehicle manufacturer.

7.   No alterations shall be made to this product.

8.   Only attachments and/or adapters supplied by the manufacturer shall be used.

9.   Do not get under or allow anyone under the vehicle until it has been supported by jack stands.

10. Center load on saddle prior to lifting.

11. Use wheel chocks or other blocking device on opposing wheels before using jack.

12. Never use on a lawn mower or lawn tractor.

13. Do not use this jack for any use other than the manufacturer specified usage.

14. Do not rock the vehicle while working on or around equipment.

15. The following are not recommended for supporting on this equipment: Foundations, Homes, Mobile 

Homes, Trailers, RV’s, Campers, nor Fifth Wheels, etc... 

16. Failure to heed these markings may result in personal injury and/or property damage.

THIS IS A LIFTING DEVICE ONLY!

• This jack is designed only for lifting part of the total vehicle.

• Do not move or dolly the vehicle while on the jack.

• The vehicle must be supported after lifting immediately by appropriately rated jack stands.

• NEVER  go under a vehicle that is not supported with appropriately rated  jacks stands.

• 

Use wheel chocks or other blocking device on opposing wheels before using jack stands.

WARNING!

WARNING!

Summary of Contents for WT83508

Page 1: ...understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating Failure to follow the safety rules and other basic safety precautions may result in serious personal injury PROFESSIONAL HYDRAULIC GARAGE JACK 3T WT83508 ...

Page 2: ...l they have read this manual and have developed a thorough understanding of how the jack works INSPECTION DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL To maintain the Service Jack and user safety the responsibility of the owner is to read and follow these instructions Inspect the service jack for proper operation and function Keep instructions readily available for equipment...

Page 3: ...icle while on the jack 6 Lift only on areas of the vehicle as specified by the vehicle manufacturer 7 No alterations shall be made to this product 8 Only attachments and or adapters supplied by the manufacturer shall be used 9 Do not get under or allow anyone under the vehicle until it has been supported by jack stands 10 Center load on saddle prior to lifting 11 Use wheel chocks or other blocking...

Page 4: ...pporting shaft 1 22 GB894 1 Φ28 C clip Φ28mm 2 23 T83508 8 Cover plate 1 No Part Description Qty 24 GB859 M6 Spring washer M6 2 25 GB67 M6X10 Machine screw M6X10 2 26 Handle socket shaft 1 27 T84004 7 Rubber sleeve 2 28 Spring washer M8 2 29 Machine screw M8X20mm 2 30 Socket head cap screw M16X25mm 2 31 T84006 5 asm Rear wheel assembly 2 32 Back shaft 1 33 Spring washer M12 2 34 Nut M12 2 35 Washe...

Reviews: