smoke pipe
cladding
heat
reservoir
firing
chamber
door
combustion
chamber
ash shield
door
handle
base
base screen
5. OPERATING INSTRUCTIONS
5.2 ABOUT THE STOVE
What’s what?
5.1 BEFORE FIRING THE
STOVE FOR THE FIRST
TIME
Dear Customer,
You have now been instructed by one
of our specialised dealers on how to
fire your Tonwerk storage heating sto-
ve.
In these operating instructions we
wish to set down each step that you
must take if you are to encounter no
problems when operating your Ton-
werk storage heating stove.
Read through these operating instruc-
tions carefully and keep them in a safe
place. Your specialised dealer will be
pleased to assist you with any que-
stions you may have.
5.3.1 WHEN THE STOVEPIPE
PAINT DRIES
When the stove is fired for the first few
times the paint on the stovepipe emits
an odour when it dries.
Make sure that the combustion cham-
ber is completely filled. The Tonwerk
storage heating stove then reaches
its optimal operating temperature and
the paint dries faster.
Also make sure the room is well venti-
lated during this phase.
5.3 GENERAL INFORMATION
5.3.3 VENT PIPE AND VENTILATING SYSTEM
Operation with indoor air:
Extractor hoods and ventilating systems can affect the
operation of your Tonwerk storage heating stove. Please make sure that there is
adequate incoming air for multiple installations.Operating the extractor hood and
ventilating system can force dangerous flue gases out of the stove and into the
room.
Under the firing regulations, joint operations are permitted only in conjunction with
a flue gas controller. When the extractor hood or ventilating system is put into ope-
ration, at least one window in the room must be open.
Operation independent of indoor air:
Make sure that the room is adequately ventilated
when your stove is operating independently of indoor air. When the firing chamber door
is opened for more firewood, there must be no sustained underpressure in the room.
5.3.4 HEATING IN THE TRANSITION TIME
AND IN DIFFICULT CONDITIONS
In damp or foggy weather, at outdoor temperatures from 15 °C, and during the tran-
sition time you are advised to light a pilot fire before firing the stove proper. This
serves to displace the cold, heavy air in the chimney and to create the right condi-
tions for the optimal extraction of smoke.
This pilot fire is lit with paper in the chimney’s inspection aperture until extraction
is assured.
convection module for
the T-NEO eco
2
DUO
5.3.2 PREPARATIONS
FOR FIRING
Have ready an adequate supply of
chopped firewood, ecofriendly lighting
aids, and kindling. You are best storing
the wood in a warm room for a number
of days before firing.
T-LINE eco
2
T-NEO eco
2
