11
Select a higher range and disable auto ranging.
Select a lower range and disable auto ranging.
Toggle between auto ranging and manual ranging.
6. Trig/Hold Key
Trig
Trigger a measurement from the front panel.
Shift
→
Trig
Hold a stable reading on the display when selected numbers of samples are
within the selected tolerance.
7. Shift/Local keys
Shift
Used to access shifted keys.
Shift
(LOCAL) Cancel RS232C remote control mode and back to the LOCAL mode.
2.2 Annunciators on Screen
DC
AC
MED
FAST
SLOW
REL
HOLD
TRIG
MATH
AUTO
DC
AC
COMP
AUTO
MAX
MIN
SHIFT
RMT
IN
LO
HI
ERR
Figure 2-2
Display Annunciators
FAST
Fast reading rate
MED
Medium reading rate
SLOW
Slow reading rate
TRIG
Indicates external trigger (front panel, bus) selected.
HOLD
Reading HOLD function is enabled
REL
Relative reading displayed
MATH
A math operation is enabled (%, dB, dBm).
(Speaker)
Beeper on for continuity testing function
(Diode)
Instrument is in diode testing function
DC
DC operation is enabled
AC AC operation is enabled
COMP Limit testing function is enabled
HI/ IN/LO Indicates the limit testing results
RMT
Multimeter is in remote control mode
AUTO
Auto ranging enabled
Max Min MAX/MIN operation is enabled
ERR
Hardware or remote control error detected
SHIFT
Accessing shifted keys
