11
3-2-8. Save Changes
Display will go back to upper menu when saving is done.
Any change of the configuration will not take effect if the changes are not saved first
prior to reset. All encoder setting changes will be set back to the factory defaults if not
saved.
All the saved values will be stored in the memory permanently until next value saved.
3-3. Configure HDDM using Web Browser
Set an IP address for the modulator from the front panel if using the factory default IP address is
not an option. Connect the modulator to a computer using a RJ45 cable.
Enter the IP address of the modulator (Default address: 192.168.1.149) on web browser
Press <Update> after changing settings in each category. Go to SAVE page to save the
configurations.
3-3-1. Ethernet
–
For Web Configuration
Save Values
Please Wait....
7. Save changes
