- 61 -
①Use only a damp cloth to clean your POWER DIGITORQON and impact
sockets since certain cleaning agents and solvents are harmful to those
parts. Some of these include: benzene, thinner, gasoline and etc.
②Never put solvents into the exhaust vent.
③Store POWER DIGITORQON in the metal case after operation and keep it
dry.
④Carbon-brush must be regularly inspected and replaced with the new
genuine carbon brush when brush length become less than 6mm as following
figure.
*Carbon brushes are placed in two positions.
*Indicate the wrench model when carbon-brushes are needed because
carbon-brush differs from model to model.
Before Use After Use
⑤Replace carbon brush as shown in the following figure.
６ｍｍ
６ｍｍ
遮断ピン
12. Inspection & Maintenance
WARNING
●
Disconnect plug from power source before inspection and
maintenance.
Accidental starting invites serious injury.
