Tone CSS110-BTL Instruction Manual Download Page 20 | Manualshive

Page: 20 / 36

Tone CSS110-BTL Instruction Manual Download Page 20

- 19 -

WARNING

●

Use a dedicated charger and storage battery.

If a storage battery other than the specified one is used, it may explode
and cause injury or damage.

●

Charge properly.

○ Do not charge the storage battery outside the operating temperature

range of the charger.

Not only will it not be charged properly, but the life of the battery will be
shortened. In addition, there is a risk of explosion and fire.

○ Charge the storage battery in a well-ventilated place.

○ Do not cover the storage battery or charger with a cloth while charging.

There is a risk of explosion or fire.

●

Do not short-circuit the terminals of the storage battery.

If you put it in a nail bag, it may cause a short circuit, resulting in smoke,
fire, or explosion.

●

Do not put a conductive liquid such as water inside the storage battery.

There is a risk of overheating, ignition, and explosion.

●

Do not put the storage battery in a fire.

It may explode or emit harmful substances.

●

Do not put the storage battery in a fire.

It may explode or emit harmful substances.

«
...
18
19
20
21
22
...
»

Summary of Contents for CSS110-BTL





































Reviews:

No comments