3
8.
Heat – Amplifier should be situated away from heat sources such as radiators,
heatregisters, stoves, or other amplifier (including amplifiers) that produce heat.
9.
Power Sources – This product should be operated only from the type of power
sourceindicated on the rating label.
If you are not sure of the type of power supply to your home, consult your product
dealer or local power company.
10.
Grounding or Polarization
– This product may be equipped with a polarized alternation-current line plug (a plug
having one blade wider than the other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
11. Power-Cord Protection
– Power-supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to the cord
in correspondence of plugs, convenience receptacles, and the point where they exit
from the amplifier.
12. Cleaning – The amplifier should be cleaned only as recommended by the
manufacturer. Clean by wiping with a cloth slightly damp with water. Avoid getting
water inside the amplifier.
14.
Non-use Periods – The power cord of the amplifier should be unplugged from
theoutlet when left unused for a long period of time.
15.
Object and Liquid Entry
– Care should be taken so that objects do not fall and liquids are not spilled into the
enclosure through openings.
16. Damage Requiring Service
– The amplifier should be serviced by qualified service personnel when:
A.
The power-supply cord or the plug has been damaged; or
B.
Objects have fallen, or liquid has been spilled into the amplifier; or
C.
The amplifier has been exposed to rain; or
D.
The amplifier does not appear to operate normally or exhibits a marked change
inperformance; or
E.
The amplifier has been dropped, or the enclosure damaged.
F.
The amplifier needs tube replacement or biasing
17.
Servicing – The user should not attempt any service to the amplifier beyond
thatdescribed in the operating instructions.
All other servicing should be referred to qualified service personnel.
18.
Ventilation – Slots and openings in the cabinet are provided for ventilation and
toensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built- in installation such as a bookcase or rack.
19.
Attachments – do not use attachments not recommended by the
productmanufacturer as they may cause hazards.
Summary of Contents for Imperial MK II
Page 7: ...6 Tube Quality 16 6 Warranty 17 7 CE Declaration 18 ...
Page 20: ...19 ...
