Tonal Plexus TPX 6s, User Manual, Page: 30 / 40

this mode, turn the unit OFF and switch DIP switch 7 to the ON position, and then turn the unit back
ON.
Default: Pitch Bend Mode OFF Option: Pitch Bend Mode ON
7 OFF : MOD Fader Controls Modulation
7 ON : MOD Fader Controls Global Pitch
1 2
7 7
2
When DIP switch 7 is ON, the following MIDI sysex messages are sent to the internal synthesizer at
startup:
Global transposition set down one 12ET wholestep:
FOh
41h 00h 42h 12h 40h 00h 05h 3Eh 00h F7h
Modulation Pitch Range: (n = all channels)
FOh
41h 00h 42h 12h 40h 2nh 00h 44h 00h F7h
Modulation LFO Amplitude set to Null: (n = all channels)
FOh
41h 00h 42h 12h 40h 2nh 04h 00h 00h F7h
NOTE: DIP 7 ON will affect the internal synthesizer only, and may confuse
external MIDI gear unless that gear recognizes Roland GS sysex messages.
Because this method gives only 1 byte pitch bending precision, beyond a bend
range of ± 01, the bending may not occur smoothly.
DIP 8: Sustain Pedal Polarity
Sustain pedals are simple switches which may be either normally open (NO) or normally closed (NC).
If you find that your sustain pedal gives reversed results (notes sustain when the pedal is UP) then
turn the unit OFF, change the position of DIP switch 8, and turn the unit back ON.
Default: SUSTAIN POLARITY - Option: SUSTAIN PO
8 OFF : Sus Pedal is an NO switch
8 ON : Sus Pedal is an NC switch
1 2
8 8
2
!"
INSTRUMENTS
www.h-pi.com ·
T O N A L P L E X U S T P X 6s/8s
· User Manual 28