Tomura PS-9304S User Manual Download Page 2

Page: 2 / 111

Digital Video Recorder User Manual

CAUTION



Please read this user manual carefully to ensure that you can use the device correctly and safely



We do not warrant all the content is correct. The contents of this manual are subject to change without notice



This device should be operated only from the type of power source indicated on the marking label. The voltage

of the power must be verified before using. Kindly remove the cables from the power source if the device is not to
be used for a long period of time.



Do not install this device near any heat sources such as radiators, heat registers, stoves or other device that

produce heat



Do not install this device near water. Clean only with a dry cloth



Do not block any ventilation openings and ensure well ventilation around the machine



Do not power off the DVR when the device is function. The correct procedure to shut down DVR is to stop

recording firstly, and then use

“shut down” button from the menu, and finally switching off the main power.



This equipment is for indoor use only. Do not expose the machine in rain or moist environment. In case any solid

or liquid get inside

the machine’s case, please cut off the power supply immediately, and get it checked by a

qualified technician.



Refer all servicing to qualified service personnel. No any parts repaired by yourself without technical aid or

approval.



This manual is suitable for 4/8/16-channel digital video recorders. All examples and pictures used in the manual

are from 8-channel DVR.

Summary of Contents for PS-9304S















































































































Search results

Summary of Contents for PS-9304S

Reviews:

Related manuals for PS-9304S

Brands by name

Popular brands

Tomura PS-9304S, User Manual

Search results

Summary of Contents for PS-9304S

Reviews:

Related manuals for PS-9304S

Brands by name

Popular brands