Testing operation
10.
19
Test-
ing op-
eration
In addition to the tests described below you can also test the operation of your LINK 510
using the TomTom Business Solutions Diagnostic Tool with Bluetooth.
Power or Ignition test
Before testing the connection to power and to the ignition make sure you have carried out
the steps described in the previous chapters.
1. Please check all connections to the LINK 510 (wires, fuses etc.).
2. Turn off the ignition. The green LED must be off and then flash on every 3 seconds.
3. Turn on the ignition. The green LED must be on and then go off every 3 seconds. If the
device is already activated, see
Activating the LINK 510
on page 11, the green LED
must be on all the time.
If the LED does not perform accordingly, see
Diagnostics
on page 22.
GPRS reception test
For this test, you may need to move the vehicle to a location with a clear view of the sky,
to make sure that you have adequate GPS and GPRS reception.
For this test put the LINK 510 in the position where you want to fix it (see
Mounting the
LINK 510
on page 16).
1. Turn on the ignition.
2. Monitor the yellow LED. It must be on and go off every 3 seconds.
As soon as the device has established a connection to WEBFLEET the yellow LED stays on
all the time.
If the LED keeps flashing for longer than 10 minutes, see
Diagnostics
on page 22.