9
EN
EN
FR
IT
NL
3
COMMISSIONING THE PRODUCT
4
USING THE PRODUCT
4.1 Adjusting seat height
1.
Pull out the pin clip on the telescopic leg
(Fig. 3, 1).
2.
Adjust the telescopic leg to the desired
length (Fig. 3, 2). Ensure holes in the inner
and outer pipes are covered.
3.
Re-insert the pin clip (Fig. 3, 1) until the clip
is fully engaged on the tube. The pin clip
must visibly and noticeably come out of the
hole again.
It is imperative that the pin clips snap into place
on the outside of the tube. Only then is it en-
sured that the pins are guided safely through
the holes and provide the shower chair with the
necessary stability.
WARNING
Risk of trapping:
Be careful of your fi ngers
when adjusting the telescopic legs.
Tipping danger:
Adjust the 2 telescopic legs
to the same length.
Risk of accident:
Ensure that the pin clips
are firmly engaged again after the height is
adjusted.
1
2
Abb. 3
4.2
Adjusting the seat surface
The seat can be adjusted horizontally or to a de-
sired inclination by turning the adjusting screw
on one of the two telescopic legs.
1.
First release the lock nuts (Fig. 4, 1).
2.
Then establish the desired position by un-
screwing or screwing in the adjusting screw
(Fig. 4, 2).
3.
Retighten the lock nut (Fig. 4, 1).
1
2
Abb. 4