4
6
5
Wind the Winch until the Winch Stap becomes
taut (4a). Loosen the single 1/2” Dock
Bracket Adjusting Bolt adjacent to the
Leveling Hook (4b).
Tighten the 1/2” Dock Adjusting Bolt.
Remove the Winch Leveling Assembly and
repeat the procedure on the next Pipe Leg.
Note:
Depending upon the amount of ad-
justment that is required to level the Dock
Section, it may be necessary to repeat the
previous leveling steps several times.
Lift or lower the Dock to achieve a level
position.
1/2” Dock Bracket
Adjusting Bolt
Dock
Water Line
Bracket
4a
4b
1/2” Dock Bracket
Adjusting Bolt
