Ensure all pouch holder and nipple parts have been
washed and sterilized as per guidelines before use
Leaving hood on nipple, attach
to screw ring adapter
1
2
Screw the assembled ring and
nipple to the pouch and holder
3
The pouch bottle is now ready
to use
4
When ready to feed, remove hood. Always ensure the pouch is upward facing. Once feed is
finished dispose of pouch and wash/sterilize all other parts as per manufacturers guidelines
5 a
Place pouch in to the holder and
click in to place. Ensure the
measurement markings are
facing outwards - remove screw
cap once in place
2. ASSEMBLING THE POUCH HOLDER
5 b
Breast milk can be expressed directly in to pump and go breast
milk pouches using our breast pump adapters
Select the relevant adapter for
the brand of breast pump you are
using
Screw the adapter on to your
breast pump
2
Attach the pouch to the pump/adapter
and express. Keep the pouch cap in a
clean safe place so it can be replaced
after expressing
3
4 a
Once you have finished expressing or when the pouch is full, unscrew from the pump and
replace the screw cap
4 b
1
Pouches should be marked and dated
for reference using a soft tipped
marker so as not to damage the bag.
Depending on how the milk freezes in
the bag, you may not get an accurate
read so we recommend recording the
volume expressed in the 'notes' section
5
1. CONNECTING STORAGE POUCHES
TO BREAST PUMP
DISASSEMBLE THE REST OF THE UNIT AND STERILIZE
ALL PARTS AS PER MANUFACTURERS GUIDELINES
