24801020
INSTRUCTION FOR CLEANING LIPPEE CUPS
• Wash all parts thoroughly in
warm soapy water and rinse in
clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing
to remove excess water and leave
to air dry before reassembling
2
1
3
CLEAN
You should thoroughly clean your valve after each use.
• Turn screw ring upside down
and place silicone disk inside
with grooves facing up
• Remove lid from cup base
• Grip lid and turn the locking
connector anti-clockwise
DISASSEMBLE
REASSEMBLE
4
5
• Take the lid top and push down
through the hole in the silicone disk
• Align locking connector and turn
clockwise to lock
6
• Separate locking connector,
silicone disk, screw ring and lid top
• Place lid on base and align the 2
dots on the back - Remember:
Do not over tighten.
Alignment indicator
INSTRUCTIONS FOR CLEANING VALVE CUPS
You should thoroughly clean your valve after each use.
• Wash all parts thoroughly in
warm soapy water and rinse in
clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing
to remove excess water and leave
to air dry before reassembling
• Un-screw the lid
• Pull out the valve
• Separate the 2 parts of
the valve (soft & hard)
WARNING
• Ensure parts A and B of the soft
side are pushed through the holes
of the hard side. Ensure the cut
B
opens by squeezing before use.
2
2
3
2
valve
1
4
5
6
DISASSEMBLE
CLEAN
REASSEMBLE
• Align the two parts
and press together
AS PER ILLUSTRATION
A
B
• Place the valve back in the lid, and
push until the sides lock into place
• Screw on lid
You should thoroughly clean your straw after each use.
INSTRUCTIONS FOR CLEANING STRAW CUPS
• Pull the straw downwards
and out from the lid
• Thread the straw back into
the trigger and clip the
trigger back into position.
CLEAN
REASSEMBLE
DISASSEMBLE
• Remove lid from cup base
• Pop up the straw by pressing
the trigger
• Remove the trigger from the lid
(wiggle left to right to release)
• Pull the trigger from the straw
• Pull straw up through lid
• Ensure silicone valve and straw
is clipped into place
1
2
5
6
3
4
Trigger
• Wash all parts thoroughly in
warm soapy water and rinse in
clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing
to remove excess water and leave
to air dry before reassembling
tommeetippee.com.au
tommeetippee.co.nz
Mayborn ANZ Pty Ltd.
(ABN 66 154 703 134)
PO Box 475,
Mt Waverley VIC 3149
AUSTRALIA
Mayborn Group is a business name of Mayborn ANZ Pty Ltd.
Copyright © 2015 Jackel International Limited
Newborn Brands (NZ) Ltd.
PO Box 47-677
Ponsonby Auckland 1144
NEW ZEALAND
