TOMCO TECHNOLOGIES, SOUTH AUSTRALIA
T003375 Issue A
Page
9
SPECIFICATIONS
Rated Output Power
250W (50
Ω
load) minimum for 0dBm drive
CW Mode Output Power
50W CW (50
Ω
load) maximum continous power
Power@1dB compression
200W (50
Ω
load) minimum
Frequency
0.1-30MHz (Alpha-S)
Gain Flatness
+/- 2.0dB max.
Maximum duty cycle (pulsed
mode)
20% continuous
Max.pulse width (pulsed
mode)
100ms
Pulse droop
<0.5dB @ max.pulse width (requires external storage capacitor)
Harmonics
<-20dBc even, -12dBc odd at 1dB compression power
Spurious
<-70dBC
Rise/fall times
<100ns typical (pre-gated)
Output noise (blanked)
<10dB above thermal (1MHz bandwidth)
Noise figure
Approx.10dB
Phase stability
5° max change over a 1ms pulse
Phase change/power
5° max.change from -30dB to full power
Phase stability/time
<1° max.change in 24hrs
Input VSWR
2:1 max.
Load VSWR
Approx 2.5:1 max. without external protection.
The module does not incorporate protection against poor load
VSWR.
Gate input
0-5V, 1.0k
Ω
Connectors
RF output: 50 ohm SMA
RF drive: SMA
Gate: SMA
Dimensions
200x120x65mm
Mass
2kg
Cooling
Forced air required
Operating Temperature
0
°
C - 40
°
C (maximum allowable case temperature 80
°
C)
Humidity
95% non-condensing