5
Check for leakage. To reduce the
risk of serious or fatal burn injuries
, do not
start or run the engine until the leak is fixed.
After fueling, tighten down the screw-type fuel cap as tight as possible.
This reduces the risk of unit vibrations causing the fuel cap to loosen or come off and spill fuel.
CONCRETE SPRAYER OPERATION
Fueling
x
This engine is certified to operate on unleaded gasoline and two-stroke engine oil at a mix
ratio of 50:1.
x
This engine requires a mixture of high-quality gasoline and two- stroke air cooled engine oil.
x
Use mid-grade unleaded gasoline with a minimum octane rating of 91 and no more than 10%
ethanol content.
x
Keep the fuel tank far away from flames or sparks. Do not smoke near fuel.
x
When adding pre-mixed fuel to the engine, use a funnel to avoid spillage.
x
When the machine is running, do not add more to the fuel tank.
x
Open the fuel cap carefully to allow and pressure build-up in the tank to release slowly and
avoid fuel spillage.
x
At the end of a season, drain all fuel from gas tank and use fuel stabilizer to insure a clear
carburetor for your next season.
NOTE:
Gasoline is an extremely flammable fuel.
Keep clear of naked
flames. Do not spill any fuel
–
do not smoke. Always
shut off the engine
before refueling. Do not fuel a hot engine
–
fuel may spill and cause a fire
.
