14
ENGLISH
ASSEMBLY THE RUDDER
Now place the thrust bearing on the guide
pin of the rudder and thread it into the re
-
ceptacle of the fuselage. The ropes now hang
into the fuselage. It has proven in this pro
-
cess, to put the fuselage 90 ° on the side.
Now the 2mm hinge pin can be inserted from
above through the rudder.
10
Now, the rudder servo arm can also be plugged
in 90 ° position on the servo in neutral position.
Pay attention to a certain bias of the ropes.
Since the eye bolts are screwed only about
4-5mm into the clevis, there is still enough
room for tensioning and adjusting the ropes.
11
Take the rudder and insert the ropes and servo lever in the back of the fuselage opening. This
works best if you put the hull upright on the nose.
09
