tomado TDW6001W, User Manual

Page: 46 / 92

Problem Possible cause Possible solution
The amount of detergent is insufficient. Make sure that you fill the detergent
reservoir with a sufficient amount of
detergent. Refer to section 'Filling the
detergent reservoir' .
The selected program is not suitable for
the loaded dishes.
Choose a suitable program. Refer to
section 'Programs' .
One of the spray arms is clogged. Clean the spray arms. Refer to section
'Cleaning the spray arms' .
The filters are clogged. Clean the filters. Refer to section
'Cleaning the filters' .
The filters are not placed correctly. Make sure that you correctly place the
filters.
The water drain pump is clogged. Make sure that the water drain pump is
not clogged.
There are white stains on the dishes. The amount of detergent is insufficient. Make sure that you fill the detergent
reservoir with a sufficient amount of
detergent. Refer to section 'Filling the
detergent reservoir' .
The level of rinse aid consumption is set
too low.
Adjust the level of rinse aid
consumption. Refer to section 'Setting
the level of rinse aid consumption' .
There is a high level of water hardness
and no salt is used.
Fill the salt reservoir. Refer to section
'Filling the salt reservoir' .
The level of water hardness is set too
low, which affects the salt consumption.
Adjust the level of salt consumption.
Refer to section 'Setting the level of salt
consumption' .
The cap of the salt reservoir is not
closed correctly.
Make sure that the cap of the salt
reservoir is closed firmly.
The dishes are not dry. The selected program does not include
drying.
Choose a program that includes drying.
Refer to section 'Programs' .
The level of rinse aid consumption is set
too low.
Adjust the level of rinse aid
consumption. Refer to section 'Setting
the level of rinse aid consumption' .
The appliance is unloaded too quickly
after the program is finished.
Wait a few minutes after the program is
finished before you unload the
appliance.
There are rust stains on the dishes. The stainless steel quality of the dishes
is insufficient.
Make sure that you only clean
dishwasher-safe dishes in the appliance.
The level of salt consumption is set too
high.
Adjust the level of salt consumption.
Refer to section 'Setting the level of salt
consumption' .
The cap of the salt reservoir is not
closed correctly.
Make sure that the cap of the salt
reservoir is closed firmly.
Any spilled salt during filling of the salt
reservoir was not cleaned immediately.
Make sure that you clean any spilled salt
immediately and run a full program to
prevent corrosion.
The water supply is polluted. Do a check on the water supply.
46 • English