CLEANING THE CONDENSER UNIT
Please clean the condenser unit approximately once every 3 months if frequently used.
Do not damage the condenser unit!
1. Leave the dryer to cool down.
2. Residual water may leak out, place an absorbent cloth under the maintenance cover.
3. Unlock the maintenance cover.
4. Completely open the maintenance cover.
5. Remove lint and fluff from the condenser unit using a vacuum cleaner with a dusting brush
attached. Do not apply any pressure. Otherwise the condenser unit could be damaged.
The dryer will not dry if the cooling fins are damaged or bent.
6. Clean the seals.
7. Close the maintenance cover until it locks into position.
WARNING! Do not use hard/sharp-edged objects!
Do not operate the dryer without the condenser unit!.
TROUBLESHOOTING
Many malfunctions and faults that might occur in daily operation can be easily remedied. Time and money will be saved
because a service call will not be needed.
The following guide may help you to find the reason for a malfunction and correct it.
Display
Reason
Solutions
Heating problem
Please contact the customer service if the problem
persists.
Humidity sensor error
Temperature sensor error
• Only authorised technicians can carry out repairs.
• If the LED displays a different error code and the dryer does not work, please call the customer service.
• Before you call the
customer service
, please check if you can resolve the problems yourself, consulting the user instructions.
EN - 37
Summary of Contents for TDH8001W
Page 79: ...79...
