Tolomatic • URL: http://www.tolomatic.com • Email: [email protected] • Fax: (763) 478-8080 • Toll Free: 1-800-328-2174
Parts Sheet #8100-4109_04_MXP16N_ps
Parts Sheet #8100-4109_04_MXP16N_ps
MXP16N
Instructions / Options – 3
Once 2nd Head is properly installed, verify the horizontal and vertical
marks on Seal Band on 1st Head did not move. If moved, use needle
nose pliers to properly locate Seal Band for both Heads.
6. INSTALL DUST BAND
Position the Piston Assembly at mid-stroke of cylinder. Slide Dust
Band (20) through the upper slot of Piston Bracket (1) and lay on top
of the Cylinder Tube slot. Position the Dust Band .394" (10mm) from
each end of Tube. Install End Caps (5) using Screws (23) into ends of
Piston Bracket (1).
7. SECURE SEAL AND DUST BANDS
In the Head (10) slot, place Seal Band Clamp (12) between Seal
Band (19) and Dust Band (20) positioning end of Seal Band Clamp
against end of Tube (26). Place Dust Band Clamp (13) onto Head
(10) so there is access to the Cushion Needle (15) then secure using
Screws (9). Tighten both Set Screws (18) to secure Dust Band.
Repeat to secure other end.
8. CHECK ASSEMBLY
Manually push the Piston Assembly back and forth along the entire
length of stroke to make certain that the cylinder is properly assembled
before reconnecting to the pneumatic supply. The Piston Assembly
should move consistently with minimal friction along the stroke. The
Dust Band should not kink at end of stroke. If it does, loosen Set
Screws (18) until kinking is eliminated and retighten.
9. REMOUNT THE CYLINDER ONTO THE MACHINE
Be certain any flow controls are in place and adjusted prior to applying
compressed air to the cylinder.
39
38
40
41
37
36
46
44
43
45
ITEM
PART NO.
or
CONFIG. CODE
DESCRIPTION
QTY.
IN
KITS
MOUNTING KITS
36 8316-9016
Mounting Plate Kit
8316-1030 Mounting Plate
1
8316-1050 T-Nut
2
4410-1018 Flat Head Cap Screw
2
37 8116-9519
Foot Mount Kit (inch)
37 8116-9019
Foot Mount Kit (metric)
8116-1055 Foot Mount
1
0910-1166 Screw (inch)
2
0604-1028 Screw (metric)
2
38 6906-9004
Floating Mount Kit (inch)
38 7906-9004
Floating Mount Kit (metric)
6906-1020 Floating Mount Bracket
1
6906-1059 Floating Mount Lower Bracket Strap
1
6906-1021 Floating Mount Pin
1
0905-1038 Screw (inch)
4
4905-1005 Screw (metric)
4
DUAL CARRIER
39 8116-9528
Dual Carrier Piston Bracket Assembly (inch)
8116-9028
Dual Carrier Piston Bracket Assembly (metric)
SWITCHES
40 Switches without Quick-Disconnect Couplers
SWMXP16NRY Reed Switch, SPST Normally Open
SWMXP16NNY Reed Switch, SPST Normally Closed
SWMXP16NTY Solid State Switch, PNP (sourcing) Normally Open
SWMXP16NKY Solid State Switch, NPN (sinking) Normally Open
SWMXP16NPY Solid State Switch, PNP (sourcing) Normally Closed
SWMXP16NHY Solid State Switch, NPN (sinking) Normally Closed
ITEM
PART NO.
or
CONFIG. CODE
DESCRIPTION
QTY.
IN
KITS
41 Switches with Quick-Disconnect Couplers
SWMXP16NRK Reed Switch, SPST Normally Open
SWMXP16NNK Reed Switch, SPST Normally Closed
SWMXP16NTK Solid State Switch, PNP (sourcing) Normally Open
SWMXP16NKK Solid State Switch, NPN (sinking) Normally Open
SWMXP16NPK Solid State Switch, PNP (sourcing) Normally Closed
SWMXP16NHK Solid State Switch, NPN (sinking) Normally Closed
SHOCK ABSORBERS
43 8116-9521
Shock Mounting Plate Kit (inch)
43 8116-9021
Shock Mounting Plate Kit (metric)
8116-1562 Shock Mounting Plate (inch)
1
8116-1062 Shock Mounting Plate (metric)
1
0905-1038 Screw (inch)
8
0601-1038 Screw (metric)
8
44 8116-9520
Fixed Shock Mounting Kit (inch)
44 8116-9020
Fixed Shock Mounting Kit (metric)
8116-1060 Fixed Shock Bracket
1
8125-1574 Screw (inch)
2
8325-1027 Screw (metric)
2
45 8116-9023
Adjustable Shock Mounting Kit
8116-1080 Upper Shock Bracket
1
8116-1082 Lower Shock Bracket Clamp
2
0602-1027 Screw
4
46 7906-1065
Lite Duty Shock Absorber
7906-1066 Heavy Duty Shock Absorber
Options - List of Parts
