•
•
(763) 478-8000
•
Toll Free: 1-800-328-2174
Parts Sheet #0510-4003_13_BC212ps
BC212
Options – 3
QTY.
ITEM PART NO. DESCRIPTION
U.S.
Conv
.
Metric T
aper Rc
Heads
Metric P
arallel G
Heads
SHOCK ABSORBERS
5
KIT
0512-9092 Shock Mount Kit
3
(Hardware Only)
US Standard
Metric
Shock
Absorber
Kit
2
Heavy
Duty
US Standard
Metric
Light
Duty
US Standard
Metric
A/R –
–
4512-9092
– A/R A/R
0512-9090
A/R –
–
4512-9090
– A/R A/R
0512-9091
A/R –
–
4512-9091
– A/R A/R
26
0912-1067 Light Duty Shock
2
–
–
4912-1067
–
2
2
0912-1068 Heavy Duty Shock
2
–
–
4912-1068
–
2
2
27 2317-1014 Socket Head Cap Screw
4
–
–
4915-1171
–
4
4
28 0912-1064 Shock Bracket
2
–
–
4912-1064
–
2
2
29 0912-1063 Impact Bolt
2
–
–
4912-1063
–
2
2
30 0512-1015 End Cap
2
2
2
FLOATING MOUNT
KIT 0512-9007 Floating Mount Kit US Standard
1
–
–
4512-9007 Floating Mount Kit Metric
–
1
1
31 0512-1009 Pin
1
1
1
32 0912-1031 Clamp
1
1
1
33 0912-1033 Bracket
1
1
1
34 0912-1029 Socket Head Cap Screw
2
–
–
4912-1029
–
2
2
FOOT MOUNT
KIT
1
0512-9125 Foot Mount Kit
1
US Standard
A/R –
–
4512-9125 Foot Mount Kit
1
Metric
– A/R A/R
35 0801-1251 Socket Head Cap Screw
4
–
–
5610-1045
–
4
4
36 0912-1008 Mounting Bracket
2
2
2
SWITCHES
37
CONFIG. CODE ORDERING
Mounting Hardware & FE conn. included
DESCRIPTION
CODE
Switch Kit, Reed, Form C, 5m
BT
Switch Kit, Reed, Form C, Male Conn.
BM
Switch Kit, Reed, Form A, 5m
RT
Switch Kit, Reed, Form A, Male Conn.
RM
Switch Kit, Triac, 5m
CT
Switch Kit, Triac, Male Conn.
CM
Switch Kit, Hall-effect, Sinking, 5m
KT
Switch Kit, Hall-effect, Sinking, Male Conn.
KM
Switch Kit, Hall-effect, Sourcing, 5m
TT
Switch Kit, Hall-effect, Sourcing, Male Conn.
TM
NOTE: When ordered female connector & all mounting hardware is included
39 0910-1238 Switch Magnet
1
1
1
TUBE SUPPORTS
4
40 4512-1010 Bracket
4
1
1
1
Service Parts Ordering NOTES:
1
Foot Mount Kit contains two foot mount brackets and
mounting hardware.
2
Shock Field Retrofit Kit contains one Shock Absorber and
mounting hardware.
3
Shock Field Mount Kit contains one set of mounting
hardware only.
4
A minimum of 2 (two) Tube Supports required per cylinder.
5
Standard end-of-stroke shock absorbers are designed to
operate without the assistance of the standard band cylinder
cushion. To ensure proper shock absorber performance,
make sure the air cushion is disabled.
A/R =
As Required
36
26
27 28
29 30
31 32
33
34
40
39
37
35
BC2
OPTIONS
SHOCK
ABSORBERS
SHOCK
ABSORBERS
FLOATING
MOUNT
TUBE
SUPPORTS
FOOT
MOUNT
SWITCHES
5. SWITCHES
On assembled cylinder, Secure Switch to open port side of cylinder with
a Clamp and Screw. Cycle the carrier over the Switch by hand to ensure
that the carrier does not hit the switch.
NOTE:
Form A Reed Switches should not be used in TTL logic
circuits. A voltage drop caused by the L.E.D. indicator will result.
For applications where TTL circuits are used, please contact
the factory.
WARNING
: An ohmmeter is recommended for testing Reed Switches.
NEVER use an incandescent light bulb as a high current rush may
damage the switch.
Reed and TRIAC switches are only recommended for signalling position,
not directly powering solenoids. For shifting a solenoid, a relay or resistor
is recommended between it and the Reed Switch. Switch ratings must
not be exceeded at any time.
To Order Retrofit Kits
All Switch Kits come with 1 switch and mounting hardware.
Model
Switch Kit
Size Switch Type Code
SW
___
__
__
SW
BC2
12 RT
Retrofit ordering method:
EXAMPLE:
