TOKMC Brand Universal bender
Operaiton Manual
SPECIFICATIONS UNIVERSAL BENDER
Capacities: Round steel: Dia. 27 mm(warm), Dia. 22mm(cold
Flat steel: 100x15mm( warm). 100x8mm(cold
Square steel: 25x25mm( warm ), 20x20mm (cold
Packing Size: 55x32x24cm
Net Weight: 30kgs
SAVE THIS MANUAL
You will need this manual for the safety instructions operating procedures
Maintenance procedures, trouble shooting, parts list, and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front
Cover Keep bot
this manual and your invoice in a safe dry place for future reference
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL
1. KEEP WORK AREA CLEAN Cluttered areas invite injuries
2. OBSERVE WORK AREA CONDITIONS Do not use tools in damp, wet, or
poorly inlocations. Don, t expose to rain. Keep work areas well fit. Do not use
electricaly powered equipment in the presence of flammable gases or liquids
3. KEEP CHILDREN AWAY. Children must never be allowed in the work area.
Do not let them handle the benders
4. STORE IDLE EQUIPMENT. When not in use tools must be locked up in a
Drylocation without rust. Always lock up tools and Keep out or reach of
children
5. DO NOT FORCE THE BENDER. It will do the
for which it was intended. Do not use inappropriate attachments in an attempt
to exceed the tool's capacities
6. USE EYE, EAR AND BREATHING PROTECTION. Always wear ANSI
approved impact safety goggles
7. DO NOT OVERREACH. Keep proper footing and balance at all times
8. MAINTAIN TOOLS WITH CARE. Keep tools clean for better and safer
Performance .Keep handle dry, clean, and free from oil and grease
9. STAY ALERT. Watch what you are dong. Do not operate any machinery
When you are tired
10. CHECK FOR DAMAGED PARTS. Before using any tool, any part that
Summary of Contents for UB-100
Page 4: ...TOKMC...
