TOKIT Razor Cooktop Pro, Operation Manual

Page: 3 / 24

02
Precautions on Electric Power
·
Do not use any power supply other than AC 220-240V for
TOKIT Razor Cooktop Pro to avoid fire or electric shock.
·
Disconnect the power supply for TOKIT Razor Cooktop
Pro by holding the power plug firmly with a hand, to
avoid a fire caused by electric shock or short circuit.
·
Do not allow children to operate the appliance alone.
Keep it out of reach of infants and young children to avoid
electric shock, scald, and other dangerous accidents.
·
Do not insert or pull out the power plug with a wet
hand to avoid electric shock or injury.
·
Use an independent power socket with its ground wire
and at a rated current above 10 A.
·
Do not operate TOKIT Razor Cooktop Pro through an
external controller or an independent remote control
system.
·
If the power cord is damaged, it must be replaced by a
professional from the manufacturer, its maintenance
department, or similar department to avoid any danger.
Environment
·
Heat will cause damage, discoloration, and deformation
to walls and furniture, so please keep the device more
than 10cm from walls and furniture during use.
·
Do not use TOKIT Razor Cooktop Pro directly on a
metal table, to avoid it against heating the metal table
and causing a danger.
·
Keep good ventilation to ensure smooth heat dissipa-
tion when using device.
·
Do not cover the vent outlet on the base of device with
plastic bags, newspapers or other sundries.
Cleaning and Daily Maintenance
·
Before cleaning, make sure to disconnect the power
plug from the power socket and wait until the device
·
Do not place this appliance in an unbalanced or humid
place or one close to a fire or heat source, but
preferably at a distance of 30cm or more from them.
·
Do not place this appliance near a device susceptible
to electromagnetic interference.
·
Do not use any non-professional pots/pans to prevent
TOKIT Razor Cooktop Pro from affecting its heating
performance or creating dangers.
·
ONLY use pots/pans that are made of iron, flat at the
bottom, not less than 12cm or larger than the heating
zone in diameter.
·
Make sure there is "food" in the pot/pan to avoid dry
heating before starting.
·
Pay attention to preventing scald when a pot/pan with
metal handles is used.
becomes cool.
·
Do not immerse any part of the device in water or spray
water on any part of it.
·
Do not rinse the air inlet or vent outlet of the device
with water.
·
Prevent water and foreign matter from entering the device
and ensure its cleanliness.
·
Do not use a steam cleaner, steel wool or other hard
items to clean or scrub the device.
·
Use soft cloth dipped with neutral detergent to wipe off
the oil on the heating surface of the device, but NOT
use bleach solution or corrosive liquid.
·
Use soft dry cloth to wipe the air inlet and vent outlet of
the device. Use a soft brush or a micro vacuum cleaner
to clean dust on the device.
·
Use soft dry cloth to clean the device after cleaning to
ensure it is dry.
·
When not using the device for a long time, disconnect
the power plug from the power socket and also protect
it from moisture, dust and insects.