Compatible USB Device:
-
Mp3 player: Flash type Mp3 player.
-
USB Flash Drive: Devices that support USB2.0 or USB 1.1.
-
The USB function may not be available depending on device.
-
Device which require additional program installation when you have
-
connected it to a computer, are not supported.
Do not extract the USB device while in operation.
RADIO OPERATION
Tips for Better RADIO Reception:
1.
To insure maximum FM tuner reception, the telescopic Antenna should be fully extended and rotated
to obtain the best possible radio reception.
2.
The AM antenna is built into the unit. When tuning in AM reception, be sure to place the unit in a
vertical position. To insure best AM reception, try repositioning the unit until the best station reception
is obtained.
1.
Press
POWER
button to turn the player on.
2.
Press the
SOURCE
button repeatedly to select
AM
or
FM
mode.
The radio frequency will show on LCD display.
3.
Press and hold the
SKIP + / TUN +
button or
SKIP - / TUN–
button to search for the next /
previous available station. If the reception is poor, try manual tuning to fine tune the station.
4.
Press the
SKIP + /TUN +
button or
SKIP - / TUN-
button briefly to manually tune through the
frequency band.
5.
Adjust the volume control to the desired volume level.
6.
Press the
SCAN
button. A bar
graph indicating the progress of the RADIO station search will be
displayed. The number
of stations found increases as the scan progresses.
Setting the Radio Station Presents
The unit allows you to store up to
FM 20
stations and
AM 10
stations for easy recall at any time.
1.
Tune to the radio station you want to store in memory.
2.
Press
Prog/Mem
button. The preset program number “P01” will be flashing on display
.
3.
To change the program number location, p
ress the
MEM+/-
buttons to step through the program
numbers ( P01-20 in FM mode or P01-10 in AM mode ).
4.
To confirm the preset location, press the
Prog/Mem
button.
5.
To store up to
20
station presets in
FM
mode or
10
stations presets in
AM
mode, repeat steps 1-4
above.
Recall preset station
In AM or FM mode, press
MEM+/-
buttons repeatedly to cycle through your memory presets and select the
preset channel.
30