JDIT-130-
N
Operating Instructions
The thermometer is a non-contact infrared thermometer. There are many mathematical modes for the
Infrared function. Please remember to keep away from children and don’t use it for safety related
applications
Simply aim the thermometer at the
measure target with Lens (9) and
press Meas. Key (7) to display the
surface
temperature.
The
Distance:Spot is 12:1. Please make
sure the target area is within the
field of view.
Function
Press Mode key (2) for scrolling more display function as follows.
ADD VALUE
In E, MAX, MIN, DIF,
AVG mode:
Press Lock key (4) for LOCK mode ON/OFF. The lock mode is particularly useful for
continuous monitoring of temperatures for up to 60 minutes.
Press ℃/ ºF key (3) for ℃ or ºF transferred
In all modes: First hold
on the Meas. key (7)
and press Lock key (4) for backlight function ON/OFF.
and press ℃/ ºF key (3) for laser function ON/OFF.
Memory
Memory Recall the last reading memory by pressing Mode key (2) while power off.
CAUTION
1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE LASER BEAM–PERMANENT EYE DAMAGE MAY
RESULT.
2. USE EXTREME CAUTION WHEN OPERATING THE LASER.
3. NEVER POINT THE DEVICE TOWARDS ANYONE’S EYES.
4. KEEP OUT OF REACH OF ALL CHILDREN
Here will show the emissivity data. (The default emissivity is 0.95)
Press Mode key (2), then press Lock key (4) or ℃/ ºF key (3) to set the emissivity, then press
Mode key (2) to confirm it. The emissivity can be changed from 0.10 (10E) to 1 (100E).
Press Mode key (2) for
the Maximum (MAX), Minimum (MIN), Different between MAX and
MIN (DIF) and Average (AVG) modes. During the measurement, the special modes reading
will be displayed beside the mode icon.
Press Lock key (4)or ℃/ ºF key (3) to change the
High Alarm (HAL)
or
Low Alarm (LAL)
, then
press Meas. key (7) to confirm it. When the reading is outside the High Alarm (HAL) or Low
Alarm (LAL) limit. The High or Low icon will flash and you will hear a beep sound.
(Default Screen)