Tohnichi MPQL Operating Instructions Manual Download Page 2

Page: 2 / 24

■

MARKING TORQUE WRENCH MODEL MPQL/MQL/MQSP

Contents

■ Contents

For Safety

…………………………………………………………………………………………………………………………………………

Features/Components

……………………………………………………………………………………………………………

How to Use

………………………………………………………………………………………………………………………………………

3.1 Set the torque value

3.2 Put the marker onto the socket

1）How to refill ink

①Marker Head MK53RB (No.1780, No.2780)

②Marker Head MK93RB (No.2783)

③Marker Head MK53WY(No.1782, No.2782), MK93WY(No.2785)

3.3 How to set the marker head

……………………………………………………………………………

3.4 Put the socket onto the torque wrench

…………………………………………………

3.5 How to adjust the position of the marker

……………………………………………

3.6 How to recover from stuck socket

………………………………………………………………

Optional Accessories

4.1 Socket

………………………………………………………………………………………………………………………………

4.2 Extension Bar

………………………………………………………………………………………………………………

4.3 MQSP Adapter

……………………………………………………………………………………………………………

4.4 Adjusting Tool (For MQSP)

………………………………………………………………………………

4.5 Marker Head

…………………………………………………………………………………………………………………

4.6 Refill Ink, Solvent

………………………………………………………………………………………………………

4.7 Felt Tip

………………………………………………………………………………………………………………………………

4.8 Marker Guide

………………………………………………………………………………………………………………

Specifications

………………………………………………………………………………………………………………………………

For previous version of Socket and Marker Head

…………………………………………

6.1 Combination of Previous Socket and New Marker Head

(No.2780, 2782, 2783, 2785)

…………………………………………………………………………

6.2 Combination of New Socket and Previous Marker Head

(No.1780, 1782, 1783, 1785)

…………………………………………………………………………

6.3 Combination of Previous Socket and Previous Marker Head

(No.1780, 1782, 1783, 1785)

…………………………………………………………………………

英語版̲MPQL・MPQL4・MQL・MQSP取説.indd 1

2016/07/19 12:55:56

Summary of Contents for MPQL

























Search results

Summary of Contents for MPQL

Reviews:

Related manuals for MPQL

Brands by name

Popular brands

Tohnichi MPQL, Operating Instructions Manual

Search results

Summary of Contents for MPQL

Reviews:

Related manuals for MPQL

Brands by name

Popular brands