44
12. MAINTENANCE IN COLD CONDITION
3.
Set the suction port cap. (keep the air valve for
drainage opened)
*Use a cap that suits the suction port size. Instead of
the suction cap, using a plane stiff panel which can
keep vacuum generated by the vacuum pump
without leaking vacuum inside the pump could be
possible.
4.
Insert the plastic tube (vinyl) to the air valve.
5.
Insert the plastic tube in the container filled with
antifreeze fluid.
(180ml/0.04gal - 200ml/0.05gal)
6.
Turn the throttle lever at “Low pressure” side.
7.
Turn on the main switch. (Turn the main switch
to ”RUN”) position.
Turn the main switch to ”START” position.
Release the main switch immediately after the
engine starts.
Suction port cap
Plastic tube
Air valve for drainage
Throttle lever
Run
Start
Main switch
