21-025 US
＜
Gateway
＞
If sharing and displaying the analog signal data on two or more TOCS4,3LCD displays and/or other NMEA2000
devices.
When turning on the gateway function on Resistive Pin 8 gateway function.
1
．
Select SENSOR CONFIG.
Press ENTER button.
２
. Press ENTER button.
3. Select NMEA2000 Gateway.
Press ENTER button.
CAUTION
The gateway function of analog trim signals cannot be used for MFS and MD models. Do not turn on the gateway function.
Otherwise, the engine instance number may not be displayed properly.
