5
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Toggle
®
Tables - Dual Motor Height Adjustable Base, Model EL
Assembly Instructions
Wire Trough (Optional)
Note:
The wire trough is an
optional part that must be
ordered separately.
Note:
Control cables can be
routed differently than shown.
The control box can be mounted
to the underside of table tops
24” in depth at one location
between the cross-tube
assembly (Figure 5). Control
boxes mounting under table
tops 30” or 36” in depth can
mount in one of five mounting
locations, one being the same
as the control box mounted
between the cross-tube
assembly on 24” table tops
(Figure 5). If the control box is
mounted between the cross-tube
assembly, reference figure 5 for
placement of the wire trough.
A 30” or 36” depth table top
is the only depth which will
allow a control box to be in
the following locations. If the
control box is mounted to the
front user side of the table,
reference figure 6. Mounting
to the front of the table does
not require the use of the
“optional key pad” (Figure 6).
If the control box is mounted
behind the cross-tube assembly,
reference figure 7.
Model Number
Operating Load Capacity
TOGL2448EL
220 lbs.
TOGL2460EL
210 lbs.
TOGL2472EL
200 lbs.
TOGL3048EL
210 lbs.
TOGL3060EL
200 lbs.
TOGL3072EL
185 lbs.
TOGL3648EL
200 lbs.
TOGL3660EL
185 lbs.
TOGL3672EL
170 lbs.
TOGLC3048EL
180 lbs.
Table Operating Capacity Chart
Figure 7 - Behind Cross-Tube Assembly Wire Trough, 30” or 36” Table Depth
wire
trough
table top
cross-tube
assembly
control
box
power
cord
key
pad cord
(optional)
leg control
cord (short)
leg control
cord (long)
