(rechargeable batteries etc.).
»
Avoid any water contact. Humidity damages the
electronics.
»
Never put parts of your model in the mouth as
this will cause serious injury, even death.
»
Never operate your model with a non-charged
smartphone or tablet.
»
Keep your model always in sight and under
control.
»
Observe the legal requirements for maximum
altitude.
»
Always use fully charged batteries.
»
Always keep all parts clean.
»
Never operate the airplane with damaged wiring.
»
Never touch moving parts.
»
Caution: Long hair can catch in the SmartPlane
Pro
FPV
Propeller.
»
Take out liability insurance before use.
»
You will take part in the general air transport
with your aircraft. .If you want to use your aircraft
commercially, you need an ascension permit.
»
The remote control (e.g., smartphone, tablet)
must always be switched on while the aircraft
is connected.
»
Never touch the rotating propeller.
Be sure to check the drones regulations applicable to your country for specific national rules and
regulations regarding the operation of unmanned aerial vehicles.
2. Checklists: Flight preparation and follow-up
2.1. Preparation of the first flight
Remove the contents of the package and check
it thoroughly for damage and functional integrity.
Read these instructions thoroughly.
Charge the battery (s. chapter 3.1.).
Download and install the App from the App Store
or Google Play Store (search term "SmartPlane
Pro TobyRich").
Search for a large open space for your first flights,
and choose a windstill day to check the flight
behavior of the SmartPlane Pro
FPV
.
Perform the Preflight Check (s. chapter 2.2.).
Switch on the aircraft and connect it to the app
(s. chapter 3.3.).
2.2. Preflight Check
(to be carried out before each flight)
Check whether the propeller can rotate freely.
Check the rudder for free movement.
Align the antenna vertically.
Use a fully charged battery.
Use a fully charged Smartphone.
Turn your smartphone on loud to get acoustic
warnings and tips.
Caution: Turn your smartphone on in flight
mode. Otherwise, the connection will interrupt
for incoming calls.
