1
4
2
3
5
6
7
8
$WWDFKWKH5HDU$[OH 'ULYLQJ:KHHO
Remove all the parts from the rear axle.
1. Insert the rear axle through the hole in the rear wheel house.
2-3. Fit the wheel driver to the wheel, Tighten four Ø4x12 screws with screwdriver.
4. Slide a gear box on the rear axle, and ensure the motor on the gear box passes
through the hole in the vehicle body.
5. Slide a driving wheel onto the rear alxe. The gear part on the driving wheel should
match up with the gear box.
6. Slide a
Ø10
washer onto the front axle.
7. Tighten a lock nut to the end of the front axle with a spanner. DO NOT over tgithen.
8. “Snap” the hubcap to the wheel.
Repeat the 2-8 procedures to assemble the other rear wheel.
9
