Tobbi TH17R058, User Manual

Page: 7 / 16

1
、
Assemble front wheels and steering shaft
a.Turn over the tractor body to make the bottom up.
b.Fix the front axle frame on the body by screw(ST4.0*12).
c.Put the washer(Ø12),front wheel,wheel cover, small washer(Ø10) one by one on the axle,and
lock the hubcap after tighten the nut(M10) by the wrench provided.
d.Align the steering shaft with the hole of gearbox and dashboard, and put it through the holes,
and insert the bent end into the hole on the steering frame.
2
、
Assemble rear wheels
a.Loose the rear support and put the rear axle into the groove on the body.
b.Install the rear support back to the body to fix the rear axle.
c.Put the gearbox, rear wheel, wheel cover, small washer(Ø10) one by one on the axle, and lock
the hubcap after tighten the nut(M10) by the wrench provided.
Notice: the drive motor wires need to be connected with the connector from the body.