5.
4.
Personal Blender Use and Care Guide
Before Using for the First Time
CAUTION: Use extreme care when handling the Blade Assembly.
Do not touch the Blades with your fingers. The Blades are very
sharp and can cause injury if touched.
1. Carefully unpack the Blender, Blending Jar, and all parts.
2. Wash the Cap, Blending Jar and Blending Jar Lid in warm soapy
water. Rinse and dry thoroughly.
3. Make sure the cord is unplugged and press and release the
OFF/PULSE Button (see Figure 2).
CAUTION: To protect against risk of electrical shock, do not
place Motor Housing, plug or cord in water or any other liquid.
4. Wipe the Motor Housing clean with a moistened cloth.
Dry thoroughly.
Blender Assembly Instructions
NOTE: Before assembling, make sure the cord is unplugged and press
and release the OFF/PULSE Button(see Figure 2).
CAUTION: Use extreme care when handling the Blade Assembly.
Do not touch the Blades with your fingers. The Blades are very
sharp and can cause injury if touched.
1. Carefully place the Blending Jar over the Motor Housing with the
Pour Spouts facing to either side as seen in Figure 1.
2. Blending Jar should then drop into the Motor Housing and lock
into place.
NOTE: The Blending Jar must be firmly attached to the Motor
Housing before putting any foods or liquids into the Blending Jar.
Getting to Know Your Toastmaster
®
Personal Blender
Your product may vary slightly from illustration.
1.
Cap (P/N 71152)
2.
Blending Jar Lid
(P/N 71153B)
3.
Pour Spouts
4.
Blending Jar (P/N 71154)
5.
Blade Assembly
6.
Motor Housing
7.
ON & OFF/PULSE
Buttons
8.
Power Cord with
Polarized Plug
9.
Non-Slip Rubber Feet
(NOTE: The replacement
lid is black in color.)
6.
5.
1.
3.
4.
2.
7.
8.
9.
Figure 1
TMR22RCAN Manual 8/17/05 2:36 PM Page 4
