background image

7

CLEAN-UP OF OVEN DOOR AND EXTERIOR
The door can be removed for easier cleaning. To remove it, open fully and lift,
clearing the hinge pins. Do not put in dishwasher. To replace, slide the door
over the hinge pins, being sure to gently push door all the way down on pins
to avoid glass breakage.
1. Always unplug and allow to cool completely before cleaning or moving.
2. Clean with glass cleaner or mild detergent and damp cloth or plastic scour-

ing pad. Do not use an abrasive cleaner or pad as they might mar the finish.

3. Rinse and dry thoroughly with a clean cloth. Allow to dry before closing

door.

TO REPLACE OVEN LIGHT
1. Unplug unit and allow oven to cool completely.
2. Remove screw from oven light bracket, holding onto bracket to prevent

glass from falling.

3. Remove bracket and glass.
4. Remove bulb by turning counter-clockwise.
5. Replace with new bulb, turning clockwise.
6. Replace glass and bracket, being sure the two tabs on the bracket are in

the slots provided for them on the oven wall.

7. Replace bracket screw.
NOTE: Use only a GE S-6 or equivalent 6-watt, 120 volt bulb.

Do not operate the oven without the oven lamp glass in place.

Any servicing requiring disassembly other than the above cleaning and
bulb replacement must be performed by an authorized service center.

SERVICE INFORMATION
Please refer to warranty statement to determine if in-warranty service applies.

This appliance must be serviced by a Toastmaster authorized service center.
Unauthorized service will void your warranty. Consult your phone directory
under “Appliances-Household-Small-Service and Repair,” or call 1-800-947-
3744 in the U.S. and Canada, 52-5-397-2848 in Mexico.

If an authorized service center is not available locally, your appliance may be
returned postage prepaid to our National Service Center at the address shown
on the back of this book.

Products must be adequately protected to avoid shipping damage. Surround
your appliance with three inches of protective padding and include a copy of
your dated sales receipt and a note explaining the problem you have experi-
enced. We recommend insuring your package. No CODs accepted.

7093X E/F/S BROILER   2/29/00  8:36 AM  Page 7

Summary of Contents for 7093X









Reviews: