7. If you want to use the Kettle again, allow the thermal safety switch to
cool down for 15 to 20 seconds then depress the On/Off Switch to the
On position. If the On/Off Switch does not remain in the On position,
the water is hot enough to use without reheating.
8. Unplug cord from wall outlet before lifting Kettle from Power Base. Only
grip the Kettle by the Handle as all other surfaces will be hot.
9. Return the Kettle to the Power Base or place on a heat resistant
surface after use.
10. If the Kettle is accidently switched on when empty, the thermostat will
automatically shut it off to prevent the Kettle from overheating.
If this situation occurs, unplug the Power Base and let the Kettle
cool before refilling.
11. It is recommended that the Power Cord be disconnected from the wall
outlet when not in use. DO NOT attempt to connect any other appliance
to the Power Base or tamper with the connector in any way.
CARE AND CLEANING
Use a soft, damp cloth to clean the exterior..
DO NOT use abrasive cleaners. Dry thoroughly before use.
DO NOT ALLOW WATER TO ENTER THE POWER BASE
DO NOT IMMERSE KETTLE OR POWER BASE IN WATER OR OTHER LIQUID.
NOTE: Condensation may form in the water level window. This is normal and
will not affect the performance of the kettle.
4
Booklet TJK-55-v004 4/20/04 3:45 PM Page 10
